RH99M is a DIN rail mounting residual current monitoring relay. It monitor drops in electrical insulation due to ageing of cables or extensions in the installation. It measures the earth leakage current in an electrical installation via its associated toroid. A control signal is issued by the relay when the residual-current operating threshold is overrun. The operational supply voltage is from 440VAC to 525VAC 50/60Hz. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. There is an automatic reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric toroid
Dane techniczne
Częstotliwość znamionowa
50 - 60 Hz
Głębokość
74 mm
Liczba styków przełącznych
1
Liczba styków rozwiernych
0
Liczba styków zwiernych
1
Maksymalna dozwolona zwłoka czasowa przy podaniu zasilania
4.82 s
Minimalna regulowana zwłoka czasowa przy podaniu zasilania
This toroid is dedicated to Vigilohm Insulation Fault locators, and to Vigirex residual current protection and monitoring relays. The inner diameter of the toroid is 120 millimeters and the weight is 1.5kg. The cables must be centered within the toroid and the diameter represented by all these cables...
This toroid is dedicated to Vigilohm Insulation Fault locators, and to Vigirex residual current protection and monitoring relays. The inner diameter of the toroid is 80 millimeters and the weight is 0.9kg. The cables must be centered within the toroid and the diameter represented by all these cables...
Kontakt z hurtowniami 
